Installing Colorbond Fence

Colorbond fence and Timber fence – both these types are common and popular choices to most of the home owners. Each type has its own benefits. However, the former is far better, long lasting and strong than the latter one. But, it is equally important to focus on its installation part as colorbond fence will remain strong if only it is installed in a right manner.
 
Things to do

When you think that you should change your fencing, you can consult with your neighbours, friends, colleagues and relatives before doing it. They can give you valuable tips and easy ways to alter your old fence and install this colorbond fence. You can search for a reputed colorbond fencing supplier in your area. They can help you to install the colorbond fence in your home's garden by their professional installer. Some people cannot install this fence as they have no adequate skills, experience and knowledge. If you think that somehow you can manage to install a new fence, then you can do it on your own. 

Check the site where the fence will be installed - Go through the site where you want to install this fencing supplies. Take a note of the height, length. See the roots, trees, slope of the area and think about choosing an appropriate colour of the fence. Make sure that the boundary is also surveyed in a proper manner. 

Necessary tools for doing the installation - You will need necessary tools to install it. There are several suppliers of this kind of fence and the cost of the fence can vary a lot. Before installing a new fence, you have to remove the old fence. Afterwards, clear as well as level the ground of the fence line where you want to put the new fence. You have to run a string line for approximately 150mm top of the ground and near the fence line. 

Vital facts - You have to screw the posts of the colorbond fence with each other. Then, you must make a hole of a considerable size at one end. Put a rail into the end post and then start digging to create another hole. Do a repetition of the whole procedure. You may have to cut the rail for adjusting the length. After that, keep a post in every hole and the bottom rails of the fence must be in it. After doing the measurements, do the adjustment of the posts. Make sure that each post must have at least 2 X 20 kg bags of Rapid set.